RepRack Labels Remixed by Bre3Dlove Designs

Remixed by

Bre3Dlove Designs

3D Printer>3D Printer Accessories

GIF

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.28mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

5.0(3)

Requested (Other & Misc.)

Designer

25 min

1 plate

5.0(1)

Requested (Arrows)

Designer

24 min

1 plate

5.0(1)

Boost

Released

Description

Snap on labels for the ½" EMT used with the RepRack system. Inspired by @schiko (Labels for Bambu Lab Filament), but I wanted a shorter height that didn't get in the way when grabbing the filament. I also wanted bigger letters and more generic labels.

If you want additional/custom labels, just let me know.

====

Created for the RepRack Storage System by Repkord

tag

Comment & Rating (15)

@Groucho

Boosted

Print Profile

0.28mm layer, 2 walls, 15% infill

turned out great. Minor request is to add in the small arrows as a way of showing endpoints.

The designer has replied

@LTB3D

Thank you for the feedback and suggestion! Here you go: https://makerworld.com/en/models/106067#profileId-381708 Let me know which option you like the best.

@Groucho

Boosted

Replying to @LTB3D :

Thanks for the quick update. I like the one in the lower right the best. You could even just ditch the straight line and make the arrow purely triangular.

@LTB3D

Replying to @Groucho :

I like it!

@Groucho

Boosted

Print Profile

Requested (Arrows)

The newest one is perfect. Took a picture so you could see.

The designer has replied

@LTB3D

Fantastic! Looks great. Thanks again for the suggestion.

@Groucho

Boosted

Print Profile

Requested (Other & Misc.)

Turned out great. As stated previously, wish there were arrows like on the original.

The designer has replied

@LTB3D

Thanks again! Arrows are now available: https://makerworld.com/en/models/106067#profileId-381708

@BodhiRemi

Print Profile

0.28mm layer, 2 walls, 15% infill

These are great and much needed. Simple and effective. Home run for me. Well done!

The designer has replied

@LTB3D

Appreciate the positive feedback 👍🏽

@Groucho

Boosted

Enjoy the boost

The designer has replied

@LTB3D

Thank you! Much appreciated - I'll add the "purely triangular" option this evening.

@user_4083307338

is it just me or are the stl files blank?

The designer has replied

@LTB3D

Hello. They are not blank. I don't know why it shows up that way under "preview". But if you "open in Bambu Studio", I'll show up just fine. If you do choose to use just the STL files, you will need to add the color to the WORDS in your slicer. The 3MF and Bambu Studio files already have that part done & included.